| BRAND | Ajinextek |
| Product | PCI-R32IO-RTEX-LCM [V1.1.1] |
| Description | PCI Board |
| Internal code | ONR4962425 |
| Technical specification | RTEX Master Card, 32 DIO Slave Master Card [Page#6] 1.3 Feature & Characteristics * RTEX Save feature Module that can be connected : IO Slave Module 32 pcs * Communication Scan Time : Renewal all the 32 modules information per every 1mSec or 500uSec(RTEX spec.) * Firmware Upgrade : Update function at system installation status is built in when exclusive function is created by user request. 1.4 Specification Table 1. Specification of PCI-R32IO-RTEX-LCM, RTEX IO Mster Board Item Specification ========================================================================== Supported Comm.Protocol Real-Time Express(Panasonic distributed network standard) Connection 100BASE-TX, STP cable(above CAR5e) Max. Slave Module that can IO Slave Module 32 pcs be installed LED Display Power(Yellow), Link(Green), Error(Red), Com(Yellow) BUS Connection type PCI 2.2, Memory access Operating Temperature range 0~+60C Operating Humidity range Less than 80% Size 119.91 x 65mm Front Panel Connector Each of RJ45 RX/TX Operating Power 5V Allowable Voltage 4.7V to 5.3V Max. Current consumed 5V / 1A [Page #7] 2.1 Hardware REAL LAYOUT (Life-size photo) [Page #8] 3. Installation 3.1 Hardware installation After you check all the components, you will install the Board as per the following order. Product is composed of PCI-R32IO-RTEX-LCM Board, Lan Cable, and RTEX Slave Module(RTEX-DIO, RTEX-AIO). Equip the PCI-R32IO-RTEX-LCM in the PC in the following order. 1) Power OFF the IPC and pull out the power plug. 2) Select PCI Slot that you will insert 3) In order to use the PCI slot selected, Remove the panel of empty slot 4) For discharge of electrostatic that might be remained in cloths or human body, contact the metal part of case with hand. 5) Insert the board in the selected PCI slot. Fix the bracket on the IPC main body with screw. 6) Check if everything is ok with naked eye. 7) Plug the IPC power into the mains and Power-ON and then operate the system. 8) Check if Power LED that is on the external Bracket of Board is properly ON 9) Check if booting is properly made. 3.2 Software Installation Refering to EzConfig RTEX User Manual, install the EzConfig. [Page#9] 3.3 Hardware explanation 3.3.1. Connector & LED (See the picture) Display mark Function Explanation ======================================================================== STATUS LED P(Power), Yellow Board Power 5V Input status L(Link), Green Light ON when RX is connected with Slave E(Error), Red RTEX Network abnormal occurrence : Flickered every second C(Comm.), Yellow Initial state : Flickered every second RTEX Network connected : Flickered in every 0.25sec. RJ45(RX : ) RTEX receive RTEX network receiving port Connected with TX of RTEX slave function module RJ45(RX : ) RTEX transmit RTEX network transmitting port Connected with RX of RTEX slave function module |
Please Contact Us to Order to offer competitive prices and delivery time for Ajinextek - PCI-R32IO-RTEX-LCM [V1.1.1] PCI Board number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in United States Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
Terminal Block
Digital Output Terminal Block
Digital Input Terminal block
![PCI-R32IO-RTEX-LCM [V1.1.1] online catalog](https://www.onrion.com/images/pdf.webp)